Logo Header  
 
 
 
           
 
     
 


Brick Slip Cutting Machine
  Tube Cutting Unit [HCU]

The HCU has been designed for the Semi-Automatic Cutting of Tubes and Rods made of Glass, Quartz, Pyrex and other hard materials with Diameters ranging from 3 mm up to 30 mm and initial lengths of up to 2.5 meters. The HCU is also available as a Fully Automatic Unit.

The HCU has been designed for High Volume production with a limited initial investment. It is designed for around the clock operations.

The support of the tubes has a fixed radius, the radius of the clamping jaws varies in relation to the diameter of the tubes or rods to be cut.

The Cutting Head movement has been automated to allow for a repetitive and high quality edge finish.

For ease of maintenance and rust prevention, stainless steel is used for the large steel surfaces exposed to coolant fluids (H20).

Benefits:

  • Very effective system for Cutting Tubes
    and Rods in High Volume
  • Limited initial investment
  • Good edge finishes
  • Easy to operate with low maintenance

 

     
 
 
   
Technical Specifications:  
   
Control Unit: PLC SEW
Cutting Capacity 1): Ø3 - 30 mm
Initial Tube/Rod Length: up to 2500 mm
Cutting Lengths: 5 - 180 mm
Cutting Length Tolerance 2): +/- 0,2 mm
Tube length multiple cutting cycle 3): 180 - 2500 mm
Tolerance multiple cutting cycle 2): +/- 0,4 mm
Capacity Cutting Motor: 4 kW
Voltage Cutting Motor: 400V/50Hz/3ph
Cutting Blade Diameter: 400 mm
Cutting Blade Bore: 60 H7 mm
Cutting Blade Flanges: with integrated cooling
Power Supply 4): 20A/400V/50Hz//3ph+n+pe
Spindle Driven by belt, mounted in precision bearings
Cutting movement control: Servo Motor
Tube Supply Semi Automatic: by Handwheel
Tube Supply Automatic: Servo Motor
Protection: Motor Overload/Air Failure/Water Supply Failure
Water Mist Suction unit:: yes
Coolant Fluid: Water
Compressed Air Pressure: 6 bar
Dimensions (L x W x H): 2300 x 1400 x 2200 mm
Weight: 900 kg
1) Larger dimensions upon request. 2) Depending on the quality and length of the tube or rod material. 3) Longer tubes on request. 4) Other voltages and frequencies upon request
   
   
 
 

Logo PTC

   
  General Sitemap
Dwarsweg 5 Company Profile Lighting Quartz
5301 KB Zaltbommel Privacy & Cookie Statement Lighting Ceramics
  Trainee Center (Dutch only) Optical Fiber
The Netherlands   Components
  SBB Petro-Chemical Laboratory
T +31 418 518 357 Brick Slip Cutting
F +31 418 513 509  
E info@tsg-ptc.com  
     
© Copyright 2010-2021 PTC - Production Technology Center b.v. All Rights Reserved.

B+BTEC - CORE DRILLING & ANCHORING TECHNOLOGY